• Specifically designed for repairing flexible pressure hoses with inner rubber lining and polyester fabric jacket
• Easy to handle
• For application of the fire hose patches contained in the repair kit
• Compact and robust square frame
• Large-surface, rectangular counter-pressure plate for perfect support of the pressure hose

• For the repair of pressure tubes with inner rubber lining and polyester synthetic fibre fabric

• For the economic repair of car tyres
• Most minor injuries in radial and cross-ply tyres can be repaired in a short time
• Repairs small rubber injuries and small tears in the fabric quickly and safely (perforations up to 12 mm in the tread area of T-tyres)
• Low operating temperature of approx.145 °C (293 °F), therefore no deformation of the tyre
• Automatic current cut-off when using timer unit

• For the economic repair of car tyres
• Most minor injuries in radial and cross-ply tyres can be repaired in a short time
• Repairs small rubber injuries and small tears in the fabric quickly and safely (perforations up to 12 mm in the tread area of T-tyres)
• Low operating temperature of approx. 145 °C (293 °F), therefore no deformation of the tyre

• For individual temperature control of the heating plates
• Especially suitable for cosmetic repairs in tyre production and retreading
• Optional for all Thermopress II machines
• Illuminated 1/0 mains switch
• Separate fuse for each heating plate/heating circuit
• Temperature controller with digital display from 0 to 200 °C (32 to 392 °F)
• Mounting clamp (on back of housing)

• Easier use of the Thermopress machines
• Support stands can be floor-mounted
• Ergonomic working height

• For further use of the Thermopress vulcanizing machines
• For faster repairing and for the repairs which are not covered by the standard equipment
• The heat is distributed evenly due to the high thermal conductivity of aluminium

• Can be used for repairs from SUV to agricultural tyres
• Repairs of any tread pattern or tyre profile, in the tread, shoulder and sidewall areas in a one-step process
• For patch sizes up to RAD 146 (VS-700-S) or RAD 188 (VS-900-S) in a one-step process
• Little rework required for the repair of tread lugs
• The use of pressure granules allows the machine to be adapted to suit every tyre contour and makes finishing work easy
• Pneumatic vibrator for compacting the granules
• No tyre deformation during the curing process

• VULCSTAR Extension kit, specifically developed for the repair of rubber tracks
• Cut injuries as well as lug tear-outs can be repaired with this kit

• Suitable for all tyre repairs with VULCSTAR 700-S and VULCSTAR 900-S
• Easy to use
• Reduces curing time by 50 %
• Curing time is controlled from VULCSTAR control box
• Low-voltage system (42 V)
• Temperature of heating mats set to 160 °C (320 °F)
• Inner heating mat size I up to RAD 145 TL/RAD 539 TL in a one-step process
• Inner heating mat size III up to RAD 186 TL in a one-step process

• Hot vulcanizing machine for repairing tread, shoulder or sidewall injuries of radial, cross-ply OTR/EM tyres, with the use of REMA TIP TOP repair patches
• EM-, truck tyre adpter are not included in delivery

• Complete with heating mat and heating pocket

Note on maintenance:

• The life of the EM heating mat can be considerably prolonged by powdering it with talcum before every use
• We recommend that the EM heating plate and EM heating pocket will be exchanged together

• For easy handling of EM tyres during the repair process
• Speeds up the positioning of the tyre in the EM machine and improves safety at work
  

• The ideal workbench for the tyre specialist, which makes it easy to keep things tidy
• Saves wasting time searching for tools
• Includes illumination, zinc-plated work surface, 4 shelves and 2 multiple tool holders, multiple socket with on/off switch

• For storing patches, tools etc.
• Ideally complements the PROFI workplace
• Local legislation and regulations for the storage of flammable liquids must be observed

• Provides the optimum working conditions for professional truck tyre repair
• For ergonomic positioning of tyres up to 24"
• Table can be tilted and swivelled

• For the repair of rubber damages to the bead of truck, low-section and super-single tyres (18" - 24")
• Mobile application is made easy by the compact and handy design
• The well-arranged control unit allows easy operation
• The Thermopress JUNIOR support stand is recommended for safe handling of the control unit

• Please request our detailed and current user instructions